polysulfide rubber
英
美
网络 聚硫橡胶; 多硫化橡胶
双语例句
- Effect on toughening epoxy adhesive with polysulfide rubber
聚硫橡胶对环氧胶粘剂的增韧作用研究 - Epoxy resin toughened by liquid polysulfide rubber exhibits good anti-impact performance and anti-bend performance.
液态聚硫橡胶增韧的环氧树脂胶表现出良好的抗冲击性能和抗弯曲性能； - It is mainly one-component polyurethane, silicon rubber and polysulfide rubber.
它主要包括单组分的聚氨酯、硅橡胶和聚硫橡胶等。 - Study on synthesis of liquid polysulfide rubber by terminal group conversion reaction
端基转化法合成液态聚硫橡胶研究 - The performance of a new sealing material made of liquid polysulfide rubber is investigated with reference to working environment in ship.
以液体聚硫橡胶作为主体材料制成密封腻子，结合舰船的使用环境，对该材料的力学性能、粘接性能、耐介质性能、耐辐照性能以及与油漆的配套性进行了研究。 - The title high-build epoxy coatings was prepared based suitable epoxy resin, fillers, solvents, etc. The influence of the amount of liquid polysulfide rubber on the adhesion, flexibility and preparation technology of epoxy coatings are studied.
通过选择合适的环氧树脂、填料、溶剂等制备了环氧厚涂层涂料，对比了不同添加量的液态聚硫橡胶对环氧厚涂层的附着力、柔韧性以及工艺的影响。 - The synthetic process of adding PU segments in polysulfide rubber was studied, including the selection of materials, the temperature and the time of the reaction and the process of reaction.
研究了在聚硫橡胶链段中引入聚氨酯链段的合成工艺。包括原料选择、反应温度及时间等因素。 - Research on the elastic abrasive performance for the alloying system of polysulfide rubber, epoxy resin and brown corundum
聚硫橡胶/环氧树酯/棕刚玉共混体系弹性磨具性能的研究 - The experiment result show that incorporation of 20% liquid polysulfide rubber can satisfy the requirement of application technology, as well as the improvement of adhesion, flexibility and heat resistance of the coatings film.
实验表明：当环氧厚涂层涂料中添加20%的液态聚硫橡胶时，可在满足涂料施工工艺性要求的前提下，使涂层的附着力、柔韧性以及耐温性能明显提高。 - Development of Polysulfide Rubber Modified With PU
聚氨酯改性聚硫橡胶的研制 - Properties, uses, manufacture process and performances of the polysulfide rubber sealant product for fuel soft tank of the new type of military aircraft were introduced.
本文介绍了新型聚硫密封剂的特性、用途，使用方法及制备工艺和性能测试结果。 - Effect of γ-ray radiation with different doses on the viscosity of mercapto-terminated liquid polysulfide rubber and the resistance to high temperature aviation kerosene for the sealants was studied. The results showed that the suitable radiation dose is 16 kGy.
本文主要研究了不同剂量γ射线辐射对巯基封端液体聚硫橡胶及其耐高温航空煤油性能的影响，确定了适宜的辐射剂量为16kGy。 - The influence of the ratio of polysulfide rubber and epoxy resin, and amount of hardener on the properties of coating film are discussed.
讨论了聚硫橡胶与环氧树脂的配比和固化剂用量对涂层性能的影响。 - Research on the polysulfide rubber/ epoxy resin/ brown corundum elastic grinding wheel
聚硫橡胶/环氧树脂/棕刚玉弹性砂轮的研制 - This study selects the two components E type epoxy resin as the main material, after the toughening modification by polysulfide rubber, its performance reaches the level as the product abroad.
本研究选择了以双组份E型环氧树脂为主体材料，经过聚硫橡胶等增韧改性，其性能指标达到了进口聚氨酯堵塞剂指标。 - The results show: polysulfide rubber and fiber used for compound modification to epoxy mortar have better toughening and anti-crack effects;
结果表明：采用聚硫橡胶和纤维对环氧砂浆进行复合改性，有较好的增韧、抗裂效果； - Study on synthesis of modified polysulfide rubber
改性聚硫橡胶合成研究 - Using polysulfide rubber improved epoxy as adhesive and graphite/ coke as matrix, the law of the frictional abrasion function and electrical function change owing to different constitutent contents in the electric friction materials was studied.
以聚硫橡胶改性环氧树脂作为粘合剂，石墨/焦炭为基体，考察了组分含量不同时材料的摩擦磨损性能和导电性能的变化规律。 - Polyether rubber impression material is commonly used for manufacture the precision impression, which has no serious undercuts. The accuracy significantly higher than condensation silicone rubber and polysulfide rubber impression materials.
聚醚橡胶印模材料常用于制取无严重倒凹的精密印模，精度明显高于缩合型硅橡胶和聚硫橡胶印模材料。